To obtain your registration code or if you are not able to recover your MHH account, kindly contact [email protected]
MHH is in-compatible with Internet explorer!
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

2001 Peugeot 307 2.0hdi siemens sid801 not starting

10
You have problem on injector. One or two is shorcut to ground or harness
Disconnected one by one and try to start engine
Dont disconnected when engine is running
Its piezo injectors
Thanks given by:
11
(08-25-2019, 09:04 PM)macrad Wrote: You have problem on injector. One or two is shorcut to ground or harness
Disconnected one by one and try to start engine
Dont disconnected when engine is running
Its piezo injectors

the engine should start

ECU fault code P1169
Engine speed 835 rpm
Battery voltage 12 volts
Capacitor 1 15 volts
Capacitor 2 70 volts
Actual delivery 40 mm3/stroke

(08-25-2019, 09:04 PM)macrad Wrote: You have problem on injector. One or two is shorcut to ground or harness
Disconnected one by one and try to start engine
Dont disconnected when engine is running
Its piezo injectors

the engine should start
the capacitors it refers to are inside the ecu but the fault may be due to shorting on the injector main cables these run at 70-80 volts
ECU fault code P1169
Engine speed 835 rpm
Battery voltage 12 volts
Capacitor 1 15 volts
Capacitor 2 70 volts
Actual delivery 40 mm3/stroke
Thanks given by:
12
i checked injectors with multimeter so its not short circuit, may be wiring, not checked yet.
EGR/DPF/FLAPS/ADBLUE/TUNING skype:  blackcobra895
Thanks given by:
13
(08-25-2019, 09:19 PM)malamadre Wrote: i checked injectors with multimeter so its not short circuit, may be wiring, not checked yet.
I sent you a pinout

you can check the wiring

Drive
Thanks given by:
14
(08-25-2019, 09:19 PM)malamadre Wrote: i checked injectors with multimeter so its not short circuit, may be wiring, not checked yet.
Tell me... How you measure piezo injectors by multimeter ???
Thanks given by:
15
i checked if they are not shorted
EGR/DPF/FLAPS/ADBLUE/TUNING skype:  blackcobra895
Thanks given by:
16
Hi,
if possible for you, try to change BSM.
Thanks given by:
17
It shows ecu locked on diagnostic, and not shows engine rpm, fuel pressure also almost dead.
EGR/DPF/FLAPS/ADBLUE/TUNING skype:  blackcobra895
Thanks given by:
18
(08-29-2019, 11:36 PM)malamadre Wrote: It shows ecu locked on diagnostic, and not shows engine rpm, fuel pressure also almost dead.
bsi has lost programming
you need to reprogram bsi and reprogram keys
you will need diagbox and the 4 digit key code
Thanks given by:

Possibly Related Threads…

Peugeot
Replies: 6
Views: 152
09-13-2019, 05:58 AM
 
Peugeot
Replies: 5
Views: 134
08-27-2019, 11:29 PM
Peugeot
Replies: 5
Views: 111
08-26-2019, 08:21 AM
 
Replies: 11
Views: 199
08-03-2019, 02:10 AM
Users browsing this thread: 1 Guest(s)