To obtain your registration code, please send an email to [email protected]
Thread Rating:
  • 18 Vote(s) - 2.61 Average
  • 1
  • 2
  • 3
  • 4
  • 5

722.6 issue

10
Check the wiring harness for oil contamination. The bushing where the connector is plugged in the transmission often fails and oil can be pushed into the transmission ECU.


Gesendet von iPhone mit Tapatalk
Thanks given by:
11
I would not dig in transmission itself..... sounds like wrong load signal...... AIR FLOW METER
Thanks given by: KG7222 , KriyenKPp
12
i agree efka. Because after acceleration on P car and transmission works correctly.
Thanks given by: KG7222 , KriyenKPp
13
(10-25-2016, 12:30 AM)efka Wrote: I would not dig in transmission itself..... sounds like wrong load signal...... AIR FLOW METER

Its interesting. I have new air flow and will test it. But one friend have the same problem...with the same rpm changes...
Thanks given by:
14
one time i found a broken spring in the valve body , i know it was delay shifting but cannot remember which gear
Thanks given by: KG7222
15
(10-25-2016, 12:42 AM)mbsupport Wrote:
(10-25-2016, 12:30 AM)efka Wrote: I would not dig in transmission itself..... sounds like wrong load signal...... AIR FLOW METER

Its interesting. I have new air flow and will test it. But one friend have the same problem...with the same rpm changes...

do not forget to clear adaptation values in engine computer
Thanks given by: KG7222 , KriyenKPp
16
Open the ECU, check ECU internal connector, has been broken
Thanks given by:
17
Program the tranny with the lastest calibration before taking anything apart.
Thanks given by:
18
not problem with the transmission itself, check boost pressure sensors, MAF, turbo air lines leakages
Mercedes-Benz Specialist
Thanks given by:
Users browsing this thread: