To obtain your registration code, please send an email to [email protected]
Thread Rating:
  • 59 Vote(s) - 3.34 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Coding 722.9

28
(08-30-2014, 10:36 PM)webmaster Wrote: Hi folks,

We simply make the procedure of transfer data from old unit to the new unit.

The extra thing that u have to do is:
Look at the old control unit version as shown in the picture:

[Image: 55gw95.png]

Then after installing new unit and transfer all data to it, we goto:
Development Data ==> Control unit adaptation ==> Variant coding ==> F3

Then we chose from the list the same number we got in image 1

[Image: 2zp2ywk.png]

This must work as reported from many of my friends but i always do the online procedure.

Please report how it goes :pc:

Best regards
:tup:

This procedure you state about data transfer is the automatic takeover of data in initial startup , right?


Sent from my iPhone using Tapatalk
Thanks given by:
29
Hello i have tried those procedures with both DAS Developer and vediamo and the coding have been transfered sucessfull but the car cant not start from the key and also in drive authorization still VGS NOT ENABLED AND NOT ACTIVATED
[img][Image: 9km7g7.jpg][/img]
[Image: 2dj52mo.jpg]
[Image: 2dj52mo.jpg]


Anyone with the idea please...
attached are picture of my scan
Thanks given by:
30
Why dont you look at my post??
Not everything its flying in the air is good to eat!
It seems that for some is that way.

It can be done and start the car in 5 minutes with DAS!!
Xentry&DTS with eCOM&VCI support
DTS 9.04.16 SUPPORT
Thanks given by: ivannzowa , amr_200
31
(10-06-2014, 01:59 PM)carlo Wrote: Why dont you look at my post??
Not everything its flying in the air is good to eat!
It seems that for some is that way.

It can be done and start the car in 5 minutes with DAS!!

send me link pls
Thanks given by:
32
(08-30-2014, 10:36 PM)webmaster Wrote: Hi folks,

We simply make the procedure of transfer data from old unit to the new unit.

The extra thing that u have to do is:
Look at the old control unit version as shown in the picture:

[Image: 55gw95.png]

Then after installing new unit and transfer all data to it, we goto:
Development Data ==> Control unit adaptation ==> Variant coding ==> F3

Then we chose from the list the same number we got in image 1

[Image: 2zp2ywk.png]

This must work as reported from many of my friends but i always do the online procedure.

Please report how it goes Pc

Best regards
Tup
Great Webmaster

I follow one this steps, but i can find my variant code XE64 to apply and test the ETC

Any Light from were?79
Thanks given by:
33
(09-20-2015, 10:02 PM)onogueira Wrote:
(08-30-2014, 10:36 PM)webmaster Wrote: Hi folks,

We simply make the procedure of transfer data from old unit to the new unit.

The extra thing that u have to do is:
Look at the old control unit version as shown in the picture:

[Image: 55gw95.png]

Then after installing new unit and transfer all data to it, we goto:
Development Data ==> Control unit adaptation ==> Variant coding ==> F3

Then we chose from the list the same number we got in image 1

[Image: 2zp2ywk.png]

This must work as reported from many of my friends but i always do the online procedure.

Please report how it goes Pc

Best regards
Tup
Great Webmaster

I follow one this steps, but i can find my variant code XE64 to apply and test the ETC

Any Light from were?79

First you need to programming new vgs by Vediamo with HW wich you have in your old VGSPc
Then you will have your variant of coding.
Best Regards
Thanks given by: onogueira , mike gao
34
(08-28-2014, 02:48 AM)amr_200 Wrote: OK ...., I will wait Ur Great help webmaster Smile <<<Make this help as a video file>>>> To all MHHAUTO MEMBERS.

You are always smart , and U can do extraordinary things Big Grin

Hello Amr,

I have the same problem as yourself, and the same tools SDS etc.

I have purchased a new conductor plate, and fixed it in the car.
Now I need to program it.

Would you please help me with the steps to do this job.

Salam.
Thanks given by:
35
This method of SCN coding will work for this
722.965
ECU Software nummer = 0009026107
ECU Hardware Number 00344603100?
Thanks given by:
36
Hello,

I have to change my plate on 722.9
-What is the procedure that works ?
I do not have online account
-I can save the old data
How to inject them into the new flat
how to code everything (offline scn)

Thanks for your help
Thanks given by:
Users browsing this thread: