Corsa D 1.3 Z13DTJ - ECU compatible?

Hello everyone, I kindly need to clarify two doubts:

1 – I have a Corsa D with a completely water-damaged ECU. I’ve found another ECU in good condition, but I need to know if they’re compatible, since I noticed some of the numbers are different.

2 – If the replacement ECU is compatible, is it enough to swap the EEPROM? Or do I need to retrieve the PIN from the new ECU to reset and reprogram it to the car?
Thanks in advance for your help!


I’m attaching photos of the original (damaged) ECU and the replacement I found.

you need to read the mpc/flash/eeprom from original and put this on the new ecu
using bdm
ie ktag, mppv18, fgtech

Hello everyone, I kindly need to clarify two doubts:

1 – I have a Corsa D with a completely water-damaged ECU. I’ve found another ECU in good condition, but I need to know if they’re compatible, since I noticed some of the numbers are different.

2 – If the replacement ECU is compatible, is it enough to swap the EEPROM? Or do I need to retrieve the PIN from the new ECU to reset and reprogram it to the car?
Thanks in advance for your help!


I’m attaching photos of the original (damaged) ECU and the replacement I found.

They are compatible.
PM me what tools do you own, and i will tell you easiest way to do this task

i have already posted what needs to be done so why does he need to pm you?
are you trying to get money from him?

---

also all the info thats needed to know is here in the forum all free

i have already posted what needs to be done so why does he need to pm you?
are you trying to get money from him?

---

also all the info thats needed to know is here in the forum all free

Mr. Domelec, I am deeply grateful for your concern. I see that you are a long-standing member, and your attitude helps keep the forum well organized. However, I would like to point out that Mr. Staker never asked me for money at any moment; he only helped clarify some doubts I had. Based on the information you provided above, and what Mr. Estacas shared, I am confident I will solve the issue with my car tomorrow. In any case, I want to express my sincere thanks to both Mr. Domelec and Mr. Staker for taking the time to guide me. 

Thank you very much.

my worries was that mostly people always say pm them to sell something
so i apologize if i offended
if you try to read the water damaged ecu and it wont read then post back here and i will upload the mpc and flash you need
the eeprom you can just remove from the damaged pcb and either read it and then write back to the other eeprom or just replace the other eeprom

my worries was that mostly people always say pm them to sell something
so i apologize if i offended
if you try to read the water damaged ecu and it wont read then post back here and i will upload the mpc and flash you need
the eeprom you can just remove from the damaged pcb and either read it and then write back to the other eeprom or just replace the other eeprom

We are part of mhh since long time. I dont offer paid services, also i never did in the past.