To obtain your registration code or if you are not able to recover your MHH account, kindly contact [email protected]
MHH is in-compatible with Internet explorer!
Thread Rating:
  • 93 Vote(s) - 2.96 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Kess v4.036 full firmware(trucks boats ) +Ktag fw 6.070 full +ksuite 2.08 safe

298
(05-29-2016, 01:08 PM)8ball Wrote:
(05-28-2016, 10:40 PM)Lucian Mc Wrote: theoretically unlimited tokens

do explainTup
nice work
Thanks given by:
299
(05-28-2016, 10:40 PM)Lucian Mc Wrote: I have for everybody an big pack
Ksuite 2.08 internet safe
Fw v4.024 full
Fw v4.036 with cars and vans that is already here
Fw v4.036 with all protocols active Cars,Trucks ,Tractors theoretically unlimited tokens .
+Rework informations for kess
Fw v6.070+ktm100 software +rework informations for ktag
Rework informations for Fgtech v53
Rework informations for mpps v16
Install new fw instructions made by a member
The steps i followed:
1.Connection to KTAG with serial dongle(cp21xx).
2.Flashed the file Lucian\Ktag 5.001 to 6.070\K-tag\fwnx.hex with flash magic and verified.
3.Installed Ksuite 2.08 from original setup then deleted all files/folders from c:\ksuite\ and replaced with those in folder "Lucian\Ktag 5.001 to 6.070\K-tag\Ksuite\"
4.Installed Ktag USB driver manually.
5.Copied \Ktag 5.001 to 6.070\K-tag\update\*.* to c:\ksuite\update\
6.Copied folder \Ktag 5.001 to 6.070\KSuite208\Dll\ to c:\ksuite\
7.Copied file \Ktag 5.001 to 6.070\KSuite208\Device.s3d to c:\ksuite\
8.Formatted SD card to FAT16.
9.Connected Ktag power and usb and started ksuite.This time all protocols were grayed out.
10.Closed Ksuite disconnected/reconnected ktag usb and restarted ksuite.It started updating devices and when finished all protocols are active.

Links in pm after thanks+rep .

(10-10-2019, 01:34 AM)Amine GTi Wrote:
(05-28-2016, 10:40 PM)Lucian Mc Wrote: I have for everybody an big pack
Ksuite 2.08 internet safe
Fw v4.024 full
Fw v4.036 with cars and vans that is already here
Fw v4.036 with all protocols active Cars,Trucks ,Tractors theoretically unlimited tokens .
+Rework informations for kess
Fw v6.070+ktm100 software +rework informations for ktag
Rework informations for Fgtech v53
Rework informations for mpps v16
Install new fw instructions made by a member
The steps i followed:
1.Connection to KTAG with serial dongle(cp21xx).
2.Flashed the file Lucian\Ktag 5.001 to 6.070\K-tag\fwnx.hex with flash magic and verified.
3.Installed Ksuite 2.08 from original setup then deleted all files/folders from c:\ksuite\ and replaced with those in folder "Lucian\Ktag 5.001 to 6.070\K-tag\Ksuite\"
4.Installed Ktag USB driver manually.
5.Copied \Ktag 5.001 to 6.070\K-tag\update\*.* to c:\ksuite\update\
6.Copied folder \Ktag 5.001 to 6.070\KSuite208\Dll\ to c:\ksuite\
7.Copied file \Ktag 5.001 to 6.070\KSuite208\Device.s3d to c:\ksuite\
8.Formatted SD card to FAT16.
9.Connected Ktag power and usb and started ksuite.This time all protocols were grayed out.
10.Closed Ksuite disconnected/reconnected ktag usb and restarted ksuite.It started updating devices and when finished all protocols are active.

Links in pm after thanks+rep .

(10-10-2019, 01:34 AM)Amine GTi Wrote:
(05-28-2016, 10:40 PM)Lucian Mc Wrote: I have for everybody an big pack
Ksuite 2.08 internet safe
Fw v4.024 full
Fw v4.036 with cars and vans that is already here
Fw v4.036 with all protocols active Cars,Trucks ,Tractors theoretically unlimited tokens .
+Rework informations for kess
Fw v6.070+ktm100 software +rework informations for ktag
Rework informations for Fgtech v53
Rework informations for mpps v16
Install new fw instructions made by a member
The steps i followed:
1.Connection to KTAG with serial dongle(cp21xx).
2.Flashed the file Lucian\Ktag 5.001 to 6.070\K-tag\fwnx.hex with flash magic and verified.
3.Installed Ksuite 2.08 from original setup then deleted all files/folders from c:\ksuite\ and replaced with those in folder "Lucian\Ktag 5.001 to 6.070\K-tag\Ksuite\"
4.Installed Ktag USB driver manually.
5.Copied \Ktag 5.001 to 6.070\K-tag\update\*.* to c:\ksuite\update\
6.Copied folder \Ktag 5.001 to 6.070\KSuite208\Dll\ to c:\ksuite\
7.Copied file \Ktag 5.001 to 6.070\KSuite208\Device.s3d to c:\ksuite\
8.Formatted SD card to FAT16.
9.Connected Ktag power and usb and started ksuite.This time all protocols were grayed out.
10.Closed Ksuite disconnected/reconnected ktag usb and restarted ksuite.It started updating devices and when finished all protocols are active.

Links in pm after thanks+rep .
Thanks given by:
300
please link
thanks
Thanks given by:
301
(05-28-2016, 10:40 PM)Lucian Mc Wrote: I have for everybody an big pack
Ksuite 2.08 internet safe
Fw v4.024 full
Fw v4.036 with cars and vans that is already here
Fw v4.036 with all protocols active Cars,Trucks ,Tractors theoretically unlimited tokens .
+Rework informations for kess
Fw v6.070+ktm100 software +rework informations for ktag
Rework informations for Fgtech v53
Rework informations for mpps v16
Install new fw instructions made by a member
The steps i followed:
1.Connection to KTAG with serial dongle(cp21xx).
2.Flashed the file Lucian\Ktag 5.001 to 6.070\K-tag\fwnx.hex with flash magic and verified.
3.Installed Ksuite 2.08 from original setup then deleted all files/folders from c:\ksuite\ and replaced with those in folder "Lucian\Ktag 5.001 to 6.070\K-tag\Ksuite\"
4.Installed Ktag USB driver manually.
5.Copied \Ktag 5.001 to 6.070\K-tag\update\*.* to c:\ksuite\update\
6.Copied folder \Ktag 5.001 to 6.070\KSuite208\Dll\ to c:\ksuite\
7.Copied file \Ktag 5.001 to 6.070\KSuite208\Device.s3d to c:\ksuite\
8.Formatted SD card to FAT16.
9.Connected Ktag power and usb and started ksuite.This time all protocols were grayed out.
10.Closed Ksuite disconnected/reconnected ktag usb and restarted ksuite.It started updating devices and when finished all protocols are active.

Links in pm after thanks+rep .
Thanks given by: pekibg
302
(05-28-2016, 10:40 PM)Lucian Mc Wrote: I have for everybody an big pack
Ksuite 2.08 internet safe
Fw v4.024 full
Fw v4.036 with cars and vans that is already here
Fw v4.036 with all protocols active Cars,Trucks ,Tractors theoretically unlimited tokens .
+Rework informations for kess
Fw v6.070+ktm100 software +rework informations for ktag
Rework informations for Fgtech v53
Rework informations for mpps v16
Install new fw instructions made by a member
The steps i followed:
1.Connection to KTAG with serial dongle(cp21xx).
2.Flashed the file Lucian\Ktag 5.001 to 6.070\K-tag\fwnx.hex with flash magic and verified.
3.Installed Ksuite 2.08 from original setup then deleted all files/folders from c:\ksuite\ and replaced with those in folder "Lucian\Ktag 5.001 to 6.070\K-tag\Ksuite\"
4.Installed Ktag USB driver manually.
5.Copied \Ktag 5.001 to 6.070\K-tag\update\*.* to c:\ksuite\update\
6.Copied folder \Ktag 5.001 to 6.070\KSuite208\Dll\ to c:\ksuite\
7.Copied file \Ktag 5.001 to 6.070\KSuite208\Device.s3d to c:\ksuite\
8.Formatted SD card to FAT16.
9.Connected Ktag power and usb and started ksuite.This time all protocols were grayed out.
10.Closed Ksuite disconnected/reconnected ktag usb and restarted ksuite.It started updating devices and when finished all protocols are active.

Links in pm after thanks+rep .

Hi
please give me link
Thanks given by:
303
(05-28-2016, 10:40 PM)Lucian Mc Wrote: I have for everybody an big pack
Ksuite 2.08 internet safe
Fw v4.024 full
Fw v4.036 with cars and vans that is already here
Fw v4.036 with all protocols active Cars,Trucks ,Tractors theoretically unlimited tokens .
+Rework informations for kess
Fw v6.070+ktm100 software +rework informations for ktag
Rework informations for Fgtech v53
Rework informations for mpps v16
Install new fw instructions made by a member
The steps i followed:
1.Connection to KTAG with serial dongle(cp21xx).
2.Flashed the file Lucian\Ktag 5.001 to 6.070\K-tag\fwnx.hex with flash magic and verified.
3.Installed Ksuite 2.08 from original setup then deleted all files/folders from c:\ksuite\ and replaced with those in folder "Lucian\Ktag 5.001 to 6.070\K-tag\Ksuite\"
4.Installed Ktag USB driver manually.
5.Copied \Ktag 5.001 to 6.070\K-tag\update\*.* to c:\ksuite\update\
6.Copied folder \Ktag 5.001 to 6.070\KSuite208\Dll\ to c:\ksuite\
7.Copied file \Ktag 5.001 to 6.070\KSuite208\Device.s3d to c:\ksuite\
8.Formatted SD card to FAT16.
9.Connected Ktag power and usb and started ksuite.This time all protocols were grayed out.
10.Closed Ksuite disconnected/reconnected ktag usb and restarted ksuite.It started updating devices and when finished all protocols are active.

Links in pm after thanks+rep .
Thanks given by: cliff047
304
(10-12-2019, 10:16 PM)Andy307 Wrote:
(05-28-2016, 10:40 PM)Lucian Mc Wrote: I have for everybody an big pack
Ksuite 2.08 internet safe
Fw v4.024 full
Fw v4.036 with cars and vans that is already here
Fw v4.036 with all protocols active Cars,Trucks ,Tractors theoretically unlimited tokens .
+Rework informations for kess
Fw v6.070+ktm100 software +rework informations for ktag
Rework informations for Fgtech v53
Rework informations for mpps v16
Install new fw instructions made by a member
The steps i followed:
1.Connection to KTAG with serial dongle(cp21xx).
2.Flashed the file Lucian\Ktag 5.001 to 6.070\K-tag\fwnx.hex with flash magic and verified.
3.Installed Ksuite 2.08 from original setup then deleted all files/folders from c:\ksuite\ and replaced with those in folder "Lucian\Ktag 5.001 to 6.070\K-tag\Ksuite\"
4.Installed Ktag USB driver manually.
5.Copied \Ktag 5.001 to 6.070\K-tag\update\*.* to c:\ksuite\update\
6.Copied folder \Ktag 5.001 to 6.070\KSuite208\Dll\ to c:\ksuite\
7.Copied file \Ktag 5.001 to 6.070\KSuite208\Device.s3d to c:\ksuite\
8.Formatted SD card to FAT16.
9.Connected Ktag power and usb and started ksuite.This time all protocols were grayed out.
10.Closed Ksuite disconnected/reconnected ktag usb and restarted ksuite.It started updating devices and when finished all protocols are active.

Links in pm after thanks+rep .
Hi
please give me link
Thanks given by: cliff047
305
(10-20-2019, 02:22 PM)pekibg Wrote:
(10-12-2019, 10:16 PM)Andy307 Wrote:
(05-28-2016, 10:40 PM)Lucian Mc Wrote: I have for everybody an big pack
Ksuite 2.08 internet safe
Fw v4.024 full
Fw v4.036 with cars and vans that is already here
Fw v4.036 with all protocols active Cars,Trucks ,Tractors theoretically unlimited tokens .
+Rework informations for kess
Fw v6.070+ktm100 software +rework informations for ktag
Rework informations for Fgtech v53
Rework informations for mpps v16
Install new fw instructions made by a member
The steps i followed:
1.Connection to KTAG with serial dongle(cp21xx).
2.Flashed the file Lucian\Ktag 5.001 to 6.070\K-tag\fwnx.hex with flash magic and verified.
3.Installed Ksuite 2.08 from original setup then deleted all files/folders from c:\ksuite\ and replaced with those in folder "Lucian\Ktag 5.001 to 6.070\K-tag\Ksuite\"
4.Installed Ktag USB driver manually.
5.Copied \Ktag 5.001 to 6.070\K-tag\update\*.* to c:\ksuite\update\
6.Copied folder \Ktag 5.001 to 6.070\KSuite208\Dll\ to c:\ksuite\
7.Copied file \Ktag 5.001 to 6.070\KSuite208\Device.s3d to c:\ksuite\
8.Formatted SD card to FAT16.
9.Connected Ktag power and usb and started ksuite.This time all protocols were grayed out.
10.Closed Ksuite disconnected/reconnected ktag usb and restarted ksuite.It started updating devices and when finished all protocols are active.

Links in pm after thanks+rep .

hello mate,what is the link for the download.thanks
Thanks given by:

Possibly Related Threads…

Mercedes Benz
Replies: 4
Views: 222
10-21-2019, 10:46 PM
 
Replies: 27
Views: 4,549
10-19-2019, 02:16 AM
Volvo
Replies: 1
Views: 114
10-17-2019, 12:10 AM
AA Bosch-logo
Replies: 107
Views: 51,148
10-11-2019, 10:05 PM
 
Replies: 22
Views: 12,204
10-10-2019, 01:23 AM
Users browsing this thread: 2 Guest(s)