Hello, i got this car for encode the immo, it comes with start error message and a friend told me using the julie emulator and doing virgin the flash memory i can syncronize it with MBstar disconnecting wsp connector from immobox.
i tried to do that but when i connect the mb start tool to engine ecu it lost and get the comunicacion each second everytime, i checked the wires of the immobox and one of them (the middle connector , not the removed) has lost the colour of cable.
tomorrow i will try to remove the emulator from ecu to fix if i have the same problem when try to diagnostic the ecu.
ECU NR is: A1661500179
here i post the original flash and virgin flash done by myself.
thanks for help
regards
i tried to do that but when i connect the mb start tool to engine ecu it lost and get the comunicacion each second everytime, i checked the wires of the immobox and one of them (the middle connector , not the removed) has lost the colour of cable.
tomorrow i will try to remove the emulator from ecu to fix if i have the same problem when try to diagnostic the ecu.
ECU NR is: A1661500179
here i post the original flash and virgin flash done by myself.
thanks for help
regards
ADF Tuning HQ
Chiptuning / ECOtuning / DSGtuning for all vehicles
Alientech / Autotuner / Dimsport / Jaltest / Piasini / EVC (WinOls5) & HPtuners distributor.
Cars, Bikes & ATV, Heavy Duty Machinery & Marine.
Since 2003. Wordwide dealers.
Chiptuning / ECOtuning / DSGtuning for all vehicles
Alientech / Autotuner / Dimsport / Jaltest / Piasini / EVC (WinOls5) & HPtuners distributor.
Cars, Bikes & ATV, Heavy Duty Machinery & Marine.
Since 2003. Wordwide dealers.
Thanks given by: lele89ca
