Hey Guys,
Got a newer Easytronic here (not the old one with electrical motors for actuation). Car came in with a broken Shift fork. Replaced that, all gears can be selected manually without the Hydraulic actuator/TCU on there. But i cant get it to select 1st and 2nd gear.
So ive checked the data and it has 2 position detectors. 1 is for the Forward-backward movement(lets call it X), and the other one is for left-right (Lets call this Y), hence its in essence a manual transmission.
Reverse can be selected and has a X 9mm and Y 29mm. But here is the kicker. This X info is after the shift is done. The Learned spot is about 6,5mm.
The same this is for the 3-4 and the 5 X-gate. The learned spot is like 3mm of the value it will show after the solenoids are no longer activated.
So i think it needs to be relearned completly. Unfortunatly, there is no option for this in the Bosch software, Texa, Launch or even GDS2.
Anyone know what else i can try to get it to relearn. Any software that will let me do that.
Got a newer Easytronic here (not the old one with electrical motors for actuation). Car came in with a broken Shift fork. Replaced that, all gears can be selected manually without the Hydraulic actuator/TCU on there. But i cant get it to select 1st and 2nd gear.
So ive checked the data and it has 2 position detectors. 1 is for the Forward-backward movement(lets call it X), and the other one is for left-right (Lets call this Y), hence its in essence a manual transmission.
Reverse can be selected and has a X 9mm and Y 29mm. But here is the kicker. This X info is after the shift is done. The Learned spot is about 6,5mm.
The same this is for the 3-4 and the 5 X-gate. The learned spot is like 3mm of the value it will show after the solenoids are no longer activated.
So i think it needs to be relearned completly. Unfortunatly, there is no option for this in the Bosch software, Texa, Launch or even GDS2.
Anyone know what else i can try to get it to relearn. Any software that will let me do that.
