Vauxhall Astra H No Communication with Vehicle/ No Communictaion With CIM

[font=Inter, "Inter Fallback", sans-serif]Good Evening people i have had a problem with my Astra Van Z19DTH 1.9CDTI i had a break in 2 wires 1 was to the ABS Module pin 4 wire for the rear left wheel and the other was the canbus connector for the power steering which was white and green serial data everything went back together and the van would not start... took all apart again and used correct wires to solder serial data and abs left wheel all put back together and the van started... now i have put the heater motor back in and started to but the van back together and now the ******* thing wont start again i have F on the CID Display its been like this now for about 3 weeks is there anyone out there that can help me please i have Tech2 and like in the title no communication with Vehicle or CIM..... PLEASE HELP......[/font]

Try disconnecting the ABS and pulling the plug. Your car has easy tronic??
Possibly delete errors afterwards

Try disconnecting the ABS and pulling the plug. Your car has easy tronic??
Possibly delete errors afterwards

no manual 6 speed I took the ABS connector of yesterday for a few minutes  no change bud