Witech2 Remote Assistance

Hi,

Can anyone help with Witech2 remote assistance, to remove Skim (P0513 Skim Active) on a replacement PCM - Dodge Ram 1500 (5.7) 2019. We ordered a PCM to VIN thinking that it would be easy to adapt - how wrong I could be (Launch, Autel Pro908/IM608 and current Witech2 set up no go).

The Set up with Mopar for Witech and my J2534 - buying 1 day for Witech2 (40$) and Tech Auth ($90) - allowed me to read and clear codes - see most live data and adapt a few settings (PCM Mileage).

When looking at VIN in PCM or Security options in BCM - I'm prompted that I do not have the authority (with link to TechInfo.fiat). I have requsted Tech info auth, however seems that unless given Authorised Repairer status (unlikey my small set up business wise) - I cannot do Immo on late Dodge FCA :-(

Can anyone help remotely with a login to adapt the new ECU?

Original ECU in the same state as this (long story - was not unlocked for Serial Comms - with Diablo i3 Tuner device lost on the network - until cloned from the new ECU)

Any help greatly appreciated - willing to pay well.

Hi,

Can anyone help with Witech2 remote assistance, to remove Skim (P0513 Skim Active) on a replacement PCM - Dodge Ram 1500 (5.7) 2019. We ordered a PCM to VIN thinking that it would be easy to adapt - how wrong I could be (Launch, Autel Pro908/IM608 and current Witech2 set up no go).

The Set up with Mopar for Witech and my J2534 - buying 1 day for Witech2 (40$) and Tech Auth ($90) - allowed me to read and clear codes - see most live data and adapt a few settings (PCM Mileage).

When looking at VIN in PCM or Security options in BCM - I'm prompted that I do not have the authority (with link to TechInfo.fiat). I have requsted Tech info auth, however seems that unless given Authorised Repairer status (unlikey my small set up business wise) - I cannot do Immo on late Dodge FCA :-(

Can anyone help remotely with a login to adapt the new ECU?

Original ECU in the same state as this (long story - was not unlocked for Serial Comms - with Diablo i3 Tuner device lost on the network - until cloned from the new ECU)

Any help greatly appreciated - willing to pay well.

contact Masoud Car Diagnostic, he have Jeep, Chrysler ,Dodge skim editor.

Hi,

Can anyone help with Witech2 remote assistance, to remove Skim (P0513 Skim Active) on a replacement PCM - Dodge Ram 1500 (5.7) 2019. We ordered a PCM to VIN thinking that it would be easy to adapt - how wrong I could be (Launch, Autel Pro908/IM608 and current Witech2 set up no go).

The Set up with Mopar for Witech and my J2534 - buying 1 day for Witech2 (40$) and Tech Auth ($90) - allowed me to read and clear codes - see most live data and adapt a few settings (PCM Mileage).

When looking at VIN in PCM or Security options in BCM - I'm prompted that I do not have the authority (with link to TechInfo.fiat). I have requsted Tech info auth, however seems that unless given Authorised Repairer status (unlikey my small set up business wise) - I cannot do Immo on late Dodge FCA :-(

Can anyone help remotely with a login to adapt the new ECU?

Original ECU in the same state as this (long story - was not unlocked for Serial Comms - with Diablo i3 Tuner device lost on the network - until cloned from the new ECU)

Any help greatly appreciated - willing to pay well.

Witech will not help you, This Ecu is one time program only! Pm me your Skype I will help you.