To obtain your registration code, please send an email to
[email protected]
HELP for MBSTAR C4 (FAKE C4/C3)
11
11-03-2016, 12:41 AM
Try to diagnose W212/W204 or new CLS W218 and then say.
REVERSE ENGINEERINGÂ | SOFTWARE ENGINEER
Hey Guys, thanks for your all reply 
Now i have xentry 09/2014 installed.. my c3 is working with d2-bin (first i tried d-bin, and i got error:
after that i deleted the bin folder and installed only D2-Bin) today i tried to connect to W216.. the connection was established, first i made a diagnose quick test, but after a time.. DAS seemed to be frozzen, then i stopped the quick test and now DAS was really frozzen, i tried it a several times, with no sucess.. than i tried to diagnose the climate and i got another error after a while..![[Image: AYJUSD.jpg]](http://imageshack.com/a/img924/5779/AYJUSD.jpg)
![[Image: AUYzVy.jpg]](http://imageshack.com/a/img924/939/AUYzVy.jpg)
So what did i wrong? Maybe because of deleting the whole bin folder?
Thanks for response
Regards Jango
CAESAR STOS+ Rev.:2.12 from Jun 16 2005
generated protocol file from 10.09.2014 13:08
SystemCheck :
Check serial ... 0 Ok
CAESAR HW Detection :
D2Access ... 0 Ok
D2DownLoad ... 0 Ok
CAESAR Part D2 detected on COM2 with baudrate: 19200
CAESAR version check :
D2CheckSNVER ... 0 Ok
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial Number 022658
Authorization Level 3
Part D
Hardware Authentification 011200
Hardware Date 040301
Special EEPROM check :
D2 Special EEPROM check:
Inst. date registered ... 0 Ok
D2 Special CAN Test :
Special Test ... 0 Ok
CAESAR version check :
D2CheckSNVER ... 0 Ok
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial Number 022658
Authorization Level 3
Part D
Hardware Authentification 011200
Hardware Date 040301
Slave check :
D2 Slave check
D2 Processor ... 0 Ok C165 (mask step CA) is mounted.
D2 RAM ... 0 Ok
D2 FLASH ... 0 Ok
D2 EEPROM ... 0 Ok
D2 SERCTL1 ... 0 Ok
D2 UART1/2 ... 0 Ok
D2 ADC ... 0 Ok
D2 Display Power Supply :
D2 Power Battery ... Voltage KL30 = 12.1 V
D2 Power Ignition ... Voltage KL15 = 11.8 V
D2 Voltage K-Lines :
D2 State K-Lines (35) ... Total 6 (+), 29 (-)

Now i have xentry 09/2014 installed.. my c3 is working with d2-bin (first i tried d-bin, and i got error:
after that i deleted the bin folder and installed only D2-Bin) today i tried to connect to W216.. the connection was established, first i made a diagnose quick test, but after a time.. DAS seemed to be frozzen, then i stopped the quick test and now DAS was really frozzen, i tried it a several times, with no sucess.. than i tried to diagnose the climate and i got another error after a while..![[Image: AYJUSD.jpg]](http://imageshack.com/a/img924/5779/AYJUSD.jpg)
![[Image: AUYzVy.jpg]](http://imageshack.com/a/img924/939/AUYzVy.jpg)
So what did i wrong? Maybe because of deleting the whole bin folder?
Thanks for response
Regards Jango
(11-07-2016, 10:38 PM)Jango0805 Wrote: Hey Guys, thanks for your all replyForget to tell that i made a MUX self test with sd toolkit..here the results:
Now i have xentry 09/2014 installed.. my c3 is working with d2-bin (first i tried d-bin, and i got error:after that i deleted the bin folder and installed only D2-Bin) today i tried to connect to W216.. the connection was established, first i made a diagnose quick test, but after a time.. DAS seemed to be frozzen, then i stopped the quick test and now DAS was really frozzen, i tried it a several times, with no sucess.. than i tried to diagnose the climate and i got another error after a while..
So what did i wrong? Maybe because of deleting the whole bin folder?
Thanks for response![]()
Regards Jango
CAESAR STOS+ Rev.:2.12 from Jun 16 2005
generated protocol file from 10.09.2014 13:08
SystemCheck :
Check serial ... 0 Ok
CAESAR HW Detection :
D2Access ... 0 Ok
D2DownLoad ... 0 Ok
CAESAR Part D2 detected on COM2 with baudrate: 19200
CAESAR version check :
D2CheckSNVER ... 0 Ok
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial Number 022658
Authorization Level 3
Part D
Hardware Authentification 011200
Hardware Date 040301
Special EEPROM check :
D2 Special EEPROM check:
Inst. date registered ... 0 Ok
D2 Special CAN Test :
Special Test ... 0 Ok
CAESAR version check :
D2CheckSNVER ... 0 Ok
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial Number 022658
Authorization Level 3
Part D
Hardware Authentification 011200
Hardware Date 040301
Slave check :
D2 Slave check
D2 Processor ... 0 Ok C165 (mask step CA) is mounted.
D2 RAM ... 0 Ok
D2 FLASH ... 0 Ok
D2 EEPROM ... 0 Ok
D2 SERCTL1 ... 0 Ok
D2 UART1/2 ... 0 Ok
D2 ADC ... 0 Ok
D2 Display Power Supply :
D2 Power Battery ... Voltage KL30 = 12.1 V
D2 Power Ignition ... Voltage KL15 = 11.8 V
D2 Voltage K-Lines :
D2 State K-Lines (35) ... Total 6 (+), 29 (-)
13
11-17-2016, 11:47 AM
14
11-17-2016, 12:47 PM
(11-17-2016, 11:47 AM)crazy40 Wrote: Really, I added those missing w204/w212 DAS folder. Working no problem at all. You have to do the right Mod. Read the thread by Pesona.
(11-03-2016, 12:41 AM)fabek Wrote: Try to diagnose W212/W204 or new CLS W218 and then say.
You got working DAS menus for the 218 with that 204/2012 DAS prototype fix? Your 212 prototype menus work with a facelift W212 too?
Please do not make conclusions based on tests with some specific cars only. Better to name the exact model (xxx.xxx) and model year of the car that has been found fine (or which did not work).
Thanks given by: pesona
15
11-19-2016, 03:31 AM
DBmhh with 09.2013 same W218 works fine without prototypes.
REVERSE ENGINEERINGÂ | SOFTWARE ENGINEER
Thanks given by: pesona
16
11-21-2016, 12:34 PM
(11-19-2016, 03:31 AM)fabek Wrote: DBmhh with 09.2013 same W218 works fine without prototypes.
Yes, 09.2014 too but not via DAS. Aren't you referring to 218 via Xentry?
I tried to understand what crazy40 had achieved when he was talking about DAS prototype fixes and I guess solving the W212 Xentry issues that way (but only some of these issues).
We never got a proper answer to your earlier question about W218, he just referred to W212 fixes.
Thanks given by: pesona
Users browsing this thread:

