MHH AUTO
Support thread for FullFixbySamik paid version - Printable Version

+- MHH AUTO (https://mhhauto.com)
+-- Forum: MHH AUTO FORUMS. (https://mhhauto.com/Forum-MHH-AUTO-FORUMS)
+--- Forum: General Automotive Help & Discussions. (https://mhhauto.com/Forum-General-Automotive-Help-Discussions)
+---- Forum: Daimler Group Mercedes-Benz, Smart Discussions. (https://mhhauto.com/Forum-Daimler-Group-Mercedes-Benz-Smart-Discussions)
+---- Thread: Support thread for FullFixbySamik paid version (/Thread-Support-thread-for-FullFixbySamik-paid-version)



RE: Support thread for FullFixbySamik paid version - Sam!k - 09-01-2025

(09-01-2025, 12:06 AM)mohammad 09071 Wrote: when i finished installing i cloned the drive to used it with a costumer laptop
here is the problem i could not activate xentry any more after cloning drive or swap ssd to an other laptop
and this is the most important to me as a seller to clone the disk

There's a package for resellers, if you didn't see.

If you change SSD, laptop of course HWID is changing, Xentry's and fix's activation keys didn't working and it's normal.


RE: Support thread for FullFixbySamik paid version - mohammad 09071 - 09-01-2025

I DONT WANT TO STEAL DEAR , BUT IN THIS WORK THERE ARE ALOT OF CRASHS SO YOU SHOULD HAVE A PACKUP DRIVE OR YOU LOSE YOUR WORK AND YOUR MONEY


RE: Support thread for FullFixbySamik paid version - Rocinante - 09-01-2025

(09-01-2025, 07:39 AM)mohammad 09071 Wrote: I DONT WANT TO STEAL DEAR , BUT IN THIS WORK THERE ARE ALOT OF CRASHS SO YOU SHOULD HAVE A PACKUP DRIVE OR YOU LOSE YOUR WORK AND YOUR MONEY

If you find the work to be unacceptable due to "all the crashes", you should choose a different solution


RE: Support thread for FullFixbySamik paid version - Big11 - 09-03-2025

Could anybody help me by configuring Vediamo 5.01.01 in this Package fur using it with J2435 Tactrix OpenPort..

There are a lot of (different) instructions for this but none worked for me as it did before i reinstalled my Laptop
and used the new Fullfix..

Before i ran Windows 10 and now i changed to Windows 11 , but i'm sure that could not be the problem.

So once More:
please help by configuring Vediamo 5.01.01 with Tactrix Openport 2.0 Adapter which works with Xentry fine.

Vediamo is activated, but i can't see ther the connected J2435 Adapter

Thank you


RE: Support thread for FullFixbySamik paid version - mpbenz - 09-03-2025

(09-03-2025, 01:41 PM)Big11 Wrote: Could anybody help me by configuring Vediamo 5.01.01 in this Package fur using it with J2435 Tactrix OpenPort..

There are a lot of (different) instructions for this but none worked for me as it did before i reinstalled my Laptop
and used the new Fullfix..

Before i ran Windows 10 and now i changed to Windows 11 , but i'm sure that could not be the problem.

So once More:
please help by configuring Vediamo 5.01.01 with Tactrix Openport 2.0 Adapter which works with Xentry fine.

Vediamo is activated, but i can't see ther the connected J2435 Adapter

Thank you

you need .ini file for OP. search well here and you will solve your problem.


RE: Support thread for FullFixbySamik paid version - Sam!k - 09-03-2025

(09-03-2025, 01:41 PM)Big11 Wrote: Could anybody help me by configuring Vediamo 5.01.01 in this Package fur using it with J2435 Tactrix OpenPort..

There are a lot of (different) instructions for this but none worked for me as it did before i reinstalled my Laptop
and used the new Fullfix..

Before i ran Windows 10 and now i changed to Windows 11 , but i'm sure that could not be the problem.

So once More:
please help by configuring Vediamo 5.01.01 with Tactrix Openport 2.0 Adapter which works with Xentry fine.

Vediamo is activated, but i can't see ther the connected J2435 Adapter

Thank you

Here's no anything for Vediamo 5 and PassThru devices.
If you want them work, search here in forum, there's at least one valid instruction.


RE: Support thread for FullFixbySamik paid version - manhnguyen3402 - 09-05-2025

I have installed Xentry 09.2025. I work with Tabscan T6xentry. But I don't see SDconnect in Config Assist. I have iíntalled Fullfix v4.8.4


RE: Support thread for FullFixbySamik paid version - Sam!k - 09-05-2025

(09-05-2025, 07:03 PM)manhnguyen3402 Wrote: I have installed Xentry 09.2025. I work with Tabscan T6xentry. But I don't see SDconnect in Config Assist. I have iíntalled Fullfix v4.8.4

Strange, if you install free version why write in paid version support thread?
SDConnect shouldn't be in ConfigAssist even in paid version.
If you use some T6 why you need SDConnect?


RE: Support thread for FullFixbySamik paid version - Sam!k - 09-06-2025

(09-06-2025, 06:04 PM)empetry Wrote: Olá, instalei o caminhão, mas estou tendo esse erro, você pode corrigi-lo ou há uma correção futura planejada?
Coloquei a sequência do procedimento. Eu uso isso para mudar o poder.
Usei a versão mais recente da correção



ola tenho instalado o caminhão, mas estou tendo esse erro, será que você consegue corrigir. ou tem previsão de correção futura.
coloquei a sequência do procedimento. isso uso para alterar potencia.

Looks like, i need to learn all languages in the world)))
Forum language is English, why you don't write in english?
In screenshots i see something like EOL, i think your problem is there.
Try download latest version 8.3.3, run fix and install only DAS Special functions option and try again.