MHH AUTO
Support thread for FullFixbySamik paid version - Printable Version

+- MHH AUTO (https://mhhauto.com)
+-- Forum: MHH AUTO FORUMS. (https://mhhauto.com/Forum-MHH-AUTO-FORUMS)
+--- Forum: General Automotive Help & Discussions. (https://mhhauto.com/Forum-General-Automotive-Help-Discussions)
+---- Forum: Daimler Group Mercedes-Benz, Smart Discussions. (https://mhhauto.com/Forum-Daimler-Group-Mercedes-Benz-Smart-Discussions)
+---- Thread: Support thread for FullFixbySamik paid version (/Thread-Support-thread-for-FullFixbySamik-paid-version)



RE: Support thread for FullFixbySamik paid version - julespatch - 09-15-2025

hey just wondering where the activation code goes once you have paid? i had to uninstall/reinstall some things and now its asking for it. im pretty certain last time i did this it didnt ask for it but it is now.

update - i paid again and got the code in an email this time, last time there was no email. case closed Smile


RE: Support thread for FullFixbySamik paid version - Sam!k - 09-15-2025

(09-15-2025, 06:04 AM)NewDriver Wrote: I cant access ZenZefi page  (https://127.0.0.1:61000/#/zenzefi/ui/certificates) Seems that ZenZefi is offline.
Xentry is logined and openned
"127.0.0.1 refused to connect"

Please advise how to fix this. Thanks

Wrong thread.


RE: Support thread for FullFixbySamik paid version - NewDriver - 09-15-2025

(09-15-2025, 11:20 AM)Sam!k Wrote:
(09-15-2025, 06:04 AM)NewDriver Wrote: I cant access ZenZefi page  (https://127.0.0.1:61000/#/zenzefi/ui/certificates) Seems that ZenZefi is offline.
Xentry is logined and openned
"127.0.0.1 refused to connect"

Please advise how to fix this. Thanks

Wrong thread.

what do you meant wrong thread ? I bought THREE paid Fixes(7.2.1, 8.1.5, 8.3.2) but only two laptops got ZenZeFi problem(Fix version 7.2.1 xentry 2024.12 & 8.3.2 xentry 2025.06).  Last time, it works fine but happened to check it today then suddenly got problem that can't access ZenZefi UI.

Where should i post for getting support ? Should i run the Fix again ? Which Fix version 7.2.1 & 8.3.2 or latest 8.3.2 ?


RE: Support thread for FullFixbySamik paid version - oitani - 09-22-2025

Please confirm if all steps are right and in order to complete the full installation for the paid version of Xentry, Vediamo, and DTS Monaco using VXDIAG VCX PLUS 13-in-1:

  1. BIOS / Firewall deactivated
  2. Fresh install of Windows 10 64-bit
  3. Install XDOS 25.6.4
  4. Install XPT 25.6.3
  5. Install FULL FIX Xentry + Truck V8.3.4
  6. Pay through your website to obtain StartKey / License for one system
  7. After that, I should be able to use all functions: diagnostics, offline programming, and flashing



RE: Support thread for FullFixbySamik paid version - Sam!k - 09-22-2025

(09-15-2025, 09:55 PM)NewDriver Wrote: what do you meant wrong thread ?

This fix can't brok or repair broken ZenZefi server!
Your problem not with fix.

(09-22-2025, 01:12 PM)oitani Wrote: Please confirm if all steps are right and in order to complete the full installation for the paid version of Xentry, Vediamo, and DTS Monaco using VXDIAG VCX PLUS 13-in-1:

  1. BIOS / Firewall deactivated
  2. Fresh install of Windows 10 64-bit
  3. Install XDOS 25.6.4
  4. Install XPT 25.6.3
  5. Install FULL FIX Xentry + Truck V8.3.4
  6. Pay through your website to obtain StartKey / License for one system
  7. After that, I should be able to use all functions: diagnostics, offline programming, and flashing

VCX didn't work with XDOS 06.2025 and upper!
You can't install XDOS and XPT on same system, need to choose one of them, better XDOS 03.2025.


RE: Support thread for FullFixbySamik paid version - oitani - 09-22-2025

So, for the VXDIAG VCX to work,
I just need to install XDOS 25.3.4 along with the full fix for Xentry and Truck V8.3.4, correct?
Do I need to uncheck or check anything specific during installation?
And once that’s done, once I make the payment, everything (Xentry, DTS Monaco, Vediamo — programming, flashing, diagnosing) should work fine, right?


RE: Support thread for FullFixbySamik paid version - Sam!k - 09-22-2025

(09-22-2025, 09:53 PM)oitani Wrote: So, for the VXDIAG VCX to work,
I just need to install XDOS 25.3.4 along with the full fix for Xentry and Truck V8.3.4, correct?
Do I need to uncheck or check anything specific during installation?
And once that’s done, once I make the payment, everything (Xentry, DTS Monaco, Vediamo — programming, flashing, diagnosing) should work fine, right?

At the first, try free version to learn all that.
There's nothing easy, there's nothing will work himself!


RE: Support thread for FullFixbySamik paid version - oitani - 09-23-2025

I have Xentry activated and running:
• XDOS version: 25.3.4
• Fix: Full fix by Samik v4.8.4
The software launches, but I am stuck with the error:
“WiFi adapter error – Cannot connect to VCX.”
I can successfully ping the device at 192.168.171.1 over LAN.
VX Manager detects the device, but Xentry will not connect.
Could you please advise how to resolve this issue?
Thank you


RE: Support thread for FullFixbySamik paid version - Alex123222 - 09-23-2025

(09-23-2025, 12:44 PM)oitani Wrote: I have Xentry activated and running:
• XDOS version: 25.3.4
• Fix: Full fix by Samik v4.8.4
The software launches, but I am stuck with the error:
“WiFi adapter error – Cannot connect to VCX.”
I can successfully ping the device at 192.168.171.1 over LAN.
VX Manager detects the device, but Xentry will not connect.
Could you please advise how to resolve this issue?
Thank you

I think you need PassThru version not OpenShell but let sam!k say too