MHH AUTO
Support thread for FullFixbySamik paid version - Printable Version

+- MHH AUTO (https://mhhauto.com)
+-- Forum: MHH AUTO FORUMS. (https://mhhauto.com/Forum-MHH-AUTO-FORUMS)
+--- Forum: General Automotive Help & Discussions. (https://mhhauto.com/Forum-General-Automotive-Help-Discussions)
+---- Forum: Daimler Group Mercedes-Benz, Smart Discussions. (https://mhhauto.com/Forum-Daimler-Group-Mercedes-Benz-Smart-Discussions)
+---- Thread: Support thread for FullFixbySamik paid version (/Thread-Support-thread-for-FullFixbySamik-paid-version)



RE: Support thread for FullFixbySamik paid version - Rocinante - 10-01-2025

(09-30-2025, 10:55 PM)gcs190 Wrote:
(09-30-2025, 10:40 PM)Rocinante Wrote: It was a 2019 or 2020 version I think. It was and old laptop that I want to put back into service..

If you clearly see the exclamation mark, it's banned. The system should never have updated it (necessary modifications), and it obviously wasn't protected from the blacklist. These are the two errors that led to the SD Connect being blocked.
To recover it, you'll need to flash a PIC with a programmer.

That's the crazy part, the 2 files in Xentry have been replaced with the correct "blacklist fix" and protected


RE: Support thread for FullFixbySamik paid version - TiKu - 10-02-2025

Hello,

i have paid version fullfix 8.3.2 and daimler trucks 10/2024 installed and running. sdconnect toolkit works, and C4+ doip is selected correctly.

My proplem is currently with Actros 963 2019 model, what is correct selection for diagnosis?  see picture1

How to connect to Actros 963 using C4 ? is it possible with this kind OFFLINE setup? i can see voltage and it reads VIN correcly. Picture2

i shamefully lost picture of the error, it said something like diagnostic is not possible offline mode or wrong communication type

i did try all combinations from picture1, none worked. always same error

Cheers and thanks [Image: smile.gif]


RE: Support thread for FullFixbySamik paid version - Jgtechdiesel - 10-02-2025

(08-06-2025, 02:33 AM)Sam!k Wrote:
(08-06-2025, 12:13 AM)mclaudio Wrote: can you support enabling this trucks?

https://imgur.com/a/N4gcWR9

No.

I´m with same problem... why i cant access this trucks ?

(08-13-2025, 06:46 AM)caiobiel456 Wrote: Bug accello and Atego euro 6 daimler truck, I don't know if it's a bug in version 4.2025, but it has this bug, if anyone knows another version that is running these two trucks in euro 6, please let me know.

did you solve it?


RE: Support thread for FullFixbySamik paid version - Rocinante - 10-02-2025

(09-30-2025, 10:44 PM)Sam!k Wrote:
(09-30-2025, 10:40 PM)Rocinante Wrote: It was a 2019 or 2020 version I think. It was and old laptop that I want to put back into service..

Then, maybe upper link can help.
Here's no any special things, need to look at this like a simple 09.2023 Toopkit, so need to look at problem as normal SDConnect problem.

Well I changed out the board with a know good board from an older broken unit I had laying around to test my theory.. It was recognized by the toolkit.. the serial number changed and I did not run Xentry.. I opened up the admin tool, it needed a software update.. I did the update and it blocked this one as well with the ! on the screen.. I looked in the SDConnect toolkit folder and there is a new folder I haven't seen before called called toolkit_old_firmwares.. The dates and sizes of the CSD update are all the same but is it possible that an update changed it out for 09/2025? Just trying to warn people of see if there is a way to stop this from happening to others. Thankfully this is not a unit i needed but just wanted as a backup..


RE: Support thread for FullFixbySamik paid version - mhh0010 - 10-02-2025

This is all very unusual...
For example, my SDconnect toolkit, which was made available for download in the forum, is the most current and the last from the SDconnect era, extracted from XDOS 09/2023.
I have successfully updated dozens of C4 clones with various SNs using it.
This is the first time I've heard of the phenomenon mentioned...
Thousands of users have never complained either.
This is really very sad strange.

PS: In the original XDOS version 09/2025, there is no longer a single trace of SDconnect C4.


RE: Support thread for FullFixbySamik paid version - Rocinante - 10-03-2025

(10-02-2025, 11:09 PM)mhh0010 Wrote: This is all very unusual...
For example, my SDconnect toolkit, which was made available for download in the forum, is the most current and the last from the SDconnect era, extracted from XDOS 09/2023.
I have successfully updated dozens of C4 clones with various SNs using it.
This is the first time I've heard of the phenomenon mentioned...
Thousands of users have never complained either.
This is really very sad strange.

PS: In the original XDOS version 09/2025, there is no longer a single trace of SDconnect C4.

I know that's why I'm baffled.. even in the older versions it was always Xentry that did the blacklisting and locked the SDconnect.. Maybe there is something wrong the the mainboard in the MUX..


RE: Support thread for FullFixbySamik paid version - Sam!k - 10-03-2025

With same files, believe me, many people use that and there wasn't any such problem, i didn't remember even one such problem.
There was one SDConnect, which wasn't working with Xentry and wasn't flashed stock firmware from 09.2023. That one was flashed with files from "toolkit_old_firmwares" and then start working. Didn't remember from which version of Xentry i extract them but they're from older version.
I thought maybe there will be any such SDConnect's, that why i put it in fix but I didn't see second with such problem.


RE: Support thread for FullFixbySamik paid version - Rocinante - 10-03-2025

(10-03-2025, 12:18 AM)Sam!k Wrote: With same files, believe me, many people use that and there wasn't any such problem, i didn't remember even one such problem.
There was one SDConnect, which wasn't working with Xentry and wasn't flashed stock firmware from 09.2023. That one was flashed with files from  "toolkit_old_firmwares" and then start working. Didn't remember from which version of Xentry i extract them but they're from older version.
I thought maybe there will be any such SDConnect's, that why i put it in fix but I didn't see second with such problem.

OK, I'm going to chalk it up to a bad SDConnect board.. thanks for the input.. Looks like another Chinese paper weight.. LOL


RE: Support thread for FullFixbySamik paid version - Heiki686 - 10-04-2025

I have a problem, not possible to connect to CLS w218 2011 year, data is missing from xentry.With DAS standalone i only have cls219 to choose.All the other models are connecting without no problems.
Because of this i did a fresh windows install and fresh xentry 6.2025 install with addons update with Samik fullfix, still the problem is there.
Is there a solution or whats wrong.