+- MHH AUTO (https://mhhauto.com)
+-- Forum: MHH AUTO FORUMS. (https://mhhauto.com/Forum-MHH-AUTO-FORUMS)
+--- Forum: Automotive Tuning. (https://mhhauto.com/Forum-Automotive-Tuning)
+--- Thread: FREE Online Remapping software and Remap accelerator UPDATE3 - SOLD (/Thread-FREE-Online-Remapping-software-and-Remap-accelerator-UPDATE3-SOLD)
Pages:
1
2
FREE Online Remapping software and Remap accelerator UPDATE3 - SOLD - coral45 - 05-09-2024
Hi everyone,
We need your help!
In a last 1,5 years we are working hard and developing FREE remapping software.
We were marked here as a scammers because we are developing something what is competitive and something what is FREE!
From these reasons we were even banned, but we are back to correct that!
Now, it's time to show all of you that we were right from the very beginning and that we are here as a long term players!
In the front of us is still a long to do list like a mappacks, auto-naming of map names (DW,SOI,DOI,...) etc....but let's go step by step.
So, let me explain you the concept we have...
1. Advanced ECU file editor which is the new generation of ''open source'' ECU/TCU file programming.
We have something what is the faster and more comfortable than WinOLS.
2. Remap accelerator which will push you to be finish with your remap as soon as possible.
This is not related to auto-remap logic.
Remap accelerator working on the principle of mirroring where user needs to upload referenced ori+tune files to get third file remapped.
Don't think that this is simple find/replace shi*, this is most advanced logic behind which covers similar numbers recognition, recognition of different map formats etc.
You can check our YT video ''How it works?'' but keep in mind that this video is not updated and it is recorded with old version of our software, new video coming soon.
If you want to see last edition of our software you can check gallery on our Website.
So, why I asked you for the help?
I need your feedback about our remapping software.
This is something what would help us a lot!
So, if you have a interest in that, please leave your comments here.
Web location (link) of the remapping software is attached below.
During account registration use referral code : mhhmember
Many thanks !
RE: FREE Online Remapping software and Remap accelerator - matteosr - 05-09-2024
I have tried to apply a stage on a car and an adblue off on another car and on first car it make 60% of work and 10% of error, on second it make 70% or work and 5% of error.
For a free service is a really a good job! Keep it up!
RE: FREE Online Remapping software and Remap accelerator - 8ball - 05-09-2024
just tried it to port over a stage1 from one car to another, given that it was edc17cp44 its not the easiest however it worked horrible
53 errors noted and more in file when rechecking it, which would take more time correcting that just manually porting changes
i get it, but its not there yet
RE: FREE Online Remapping software and Remap accelerator - coral45 - 05-10-2024
(05-09-2024, 10:11 PM)8ball Wrote: just tried it to port over a stage1 from one car to another, given that it was edc17cp44 its not the easiest however it worked horrible
53 errors noted and more in file when rechecking it, which would take more time correcting that just manually porting changes
i get it, but its not there yet
Thank you for your feedback.
Please, be sure that your referenced files are from the same car model as file you want to remap.
E.g. if you want to remap Golf 7, 2.0TDI, 150HP you can't use referenced files from Golf 7, 2.0TDI, 184HP
If you are using combination as I described then you'll get no-sense edits with a lot of errors.
We are working on file recognitions and all illegal combinations will not be allowed to remap, at this moment this needs to be cared by user.
Always will be exotic cases, but normally accelerator will perform 90-100 % of differences.
RE: FREE Online Remapping software and Remap accelerator - serigle06 - 05-10-2024
(05-09-2024, 05:15 PM)coral45 Wrote: Hi everyone,
We need your help!
In a last 1,5 years we are working hard and developing FREE remapping software.
We were marked here as a scammers because we are developing something what is competitive and something what is FREE!
From these reasons we were even banned, but we are back to correct that!
Now, it's time to show all of you that we were right from the very beginning and that we are here as a long term players!
In the front of us is still a long to do list like a mappacks, auto-naming of map names (DW,SOI,DOI,...) etc....but let's go step by step.
So, let me explain you the concept we have...
1. Advanced ECU file editor which is the new generation of ''open source'' ECU/TCU file programming.
We have something what is the faster and more comfortable then WinOLS.
2. Remap accelerator which will push you to be finish with your remap as soon as possible.
This is not related to auto-remap logic.
Remap accelerator working on the principle of mirroring where user needs to upload referenced ori+tune files to get third file remapped.
Don't think that this is simple find/replace shi*, this is most advanced logic behind which covers similar numbers recognition, recognition of different map formats etc.
You can check our YT video ''How it works?'' but keep in mind that this video is not updated and it is recorded with old version of our software, new video coming soon.
If you want to see last edition of our software you can check gallery on our Website.
So, why I asked you for the help?
I need your feedback about our remapping software.
This is something what would help us a lot!
So, if you have a interest in that, please leave your comments here.
Web location (link) of the remapping software is attached below.
Many thanks !
Congratulations mate.
I didn't tried your software but it show how much effort did you put there and that is very apreciated by me.
I wish all the best for your project.
Regards.
RE: FREE Online Remapping software and Remap accelerator - Darkshado87 - 05-10-2024
Tried edc17cp24 and basic me7 and no maps found
RE: FREE Online Remapping software and Remap accelerator - coral45 - 05-10-2024
I will clarify all of your doubts here, within one comment.
1. At this moment, we have implemented auto detected maps logic as WinOLS has.
There are auto detected maps without map naming (as DOI,SOI,DW,etc.).
As I said, be aware that we have solution for maps naming but we need time to develop it.
We have found solution even for ECUs like PCR2.1
There you will have named auto-detected maps also, but give us little bit more time to do this!
2. ECU File Editor you can use independently from Remap Accelerator!
Just upload file you want to remap (ECU/TCU doesn't matter), apply any edits you need and save (download) it.
You can zoom in/zoom out graphic, manipulate with precision, factor, offset and all other stuffs you need.
Please, notice that we have ''two editors'' BLUE and BLACK.
BLUE EDITOR is showing you ''file you want to remap'' and there you can make edits you want
BLACK is only viewer which showing you your uploaded referenced files (overlapped).
3. If accelerator percentage is too low, put your focus on referenced files you uploaded.
There is probably some issue about compatibility between your ''file you want to remap'' and ''referenced files''.
These files (''file you want to remap'' and ''referenced files'') needs to be from the same car model (means, also the engine power needs to be the same).
In general, for your understanding!
Remap accelerator will take all differences between referenced ori file and reference remapped file and try to transfer it to ''file you want to remap''.
From that reason is mandatory to take care about these two points:
1.Reference ori file and reference tune file must be identical regarding HW,SW,firmware version.
If you don't follow this rule there will be detected also other differences which are not the part of remap and accelerator will not work correctly
and will transfer no-sense changes in case it will be found.
2. Referenced files (ori+tune) must be from the same car model (also, engine power needs to be the same) as is your file you want to remap.
E.g. we will raise an error in case that your referenced files have 5 NmtoIQ maps and ''file you want to remap'' has only 4.
Error will tells you that one map could not be found in ''file you want to remap''.
At the end this is not really error but it is something what user needs to check before save (download) file.
We understand issues about understanding of this concept at first but it is because we have new approach to get file remapped.
Once, when you have fully understanding about our concept, you will be much more efficient than the conventional way we know now!
FREE Online Remapping software and Remap accelerator - ZeroDay - 05-10-2024
It's important to acknowledge the time and dedication required to accomplish tasks. As a seasoned code maker in my daily work, I understand from firsthand experience how time-consuming it can be to produce quality products. Therefore, I find it essential to show appreciation for the effort people invest in free projects for anyone to use.
Anything then respect mate.[emoji1376]
RE: FREE Online Remapping software and Remap accelerator - coral45 - 05-11-2024
(05-10-2024, 01:57 PM)ZeroDay Wrote: It's important to acknowledge the time and dedication required to accomplish tasks. As a seasoned code maker in my daily work, I understand from firsthand experience how time-consuming it can be to produce quality products. Therefore, I find it essential to show appreciation for the effort people invest in free projects for anyone to use.
Anything then respect mate.[emoji1376]
Thank you very much for your support!
------------------------------------------------
I forgot to inform all of you that we have also free billboards to promote tuners business , so if someone needs FREE promotion can contact me in PM!