CARLABIMMO 🟡 Julie™ PRO – Version 124!

Hi
Can we use julie emu for multiple times,I mean if I sometime use it just for testing one job and after if use it for some other job (resolder J1,J2,J3..and use it for different job,car,ecu..)???
Hope I was clear enough?

Yes you can.

Also worth getting one and making it into a bypass gold for vag ecu's then you can keep it and use it as many times as you like.

For me Julie emulator works excellent, and better now no can switch needed on Renault with can, but I have not tried it yet

Hi
Can we use julie emu for multiple times,I mean if I sometime use it just for testing one job and after if use it for some other job (resolder J1,J2,J3..and use it for different job,car,ecu..)???
Hope I was clear enough?

Yes you can.

Also worth getting one and making it into a bypass gold for vag ecu's then you can keep it and use it as many times as you like.

For me Julie emulator works excellent, and better now no can switch needed on Renault with can, but I have not tried it yet

I couldn't have said it better!
You are absolutely right

---

---

New emulators available!
CLIXE RENAULT ESL1 & ESL2 - with plug!



--------------------------------------------------

You can buy it now in our Official Online Shop!
https://shop.carlabimmo.com/en_US/c/RENAULT/57

hello
any solution for me 2.8 immo off clk 320 w209?
thank you

hello
any solution for me 2.8 immo off clk 320 w209?
thank you

Hi!
I recommend that you write on CarLabImmo Forum: http://forum.carlabimmo.com

Write your car/ECU details, attach original file and our tech department will work on it.
If they make it, the solution will be available to download in our program - Immo Bypass. You can learn more about it here: https://carlabimmo.com/immo-bypass

Over 30 new emulators from CarLabImmo are available in CarLabImmo Online Shop!

Introducing: CLIXE Emulators

CLIXE Emulators are a group of more than 30 emulators. Each of them is dedicated to a specific car brand or to a single program from JULIE Universal Emulator.

CLIXE Emulators will help you:
- remove or replace ESL signal
- replace Electronic Steering Wheel Lock (ESL) signal (plugs also available!)
- check the correct functioning of the Seat Occupancy Sensor (plugs also available!)

CLIXE Emulators are a great alternative to those who are looking for an emulator that is dedicated to their need at a great price!


Buy CLIXE Emulators: https://shop.carlabimmo.com/Clixe
Learn more: https://carlabimmo.com/clixe

---

JULIE EMULATOR 10+1 DISCOUNT!

Your favourite discount is back! From today until the end of June - for every 10 Julie Emulators that you buy, we will give you one more Julie Emulator for free!

The offer is valid from 12.06.2018 to 30.06.2018

Buy: https://https://shop.carlabimmo.com/JULIE_11_PACK

---

SIEMENS SID 301
IMMO OFF
with JULIE EMULATOR

You can now make IMMO OFF on SIEMENS SID 301 ECU with JULIE Universal Emulator!

We have added this solution to the instruction manual: (click to open manual)

Get the world's most popular emulator for repairing car electronics

Buy JULIE Universal Emulator: https://shop.carlabimmo.com/julie-univer...r-emulator

Hi there ... Yesterday i tryed julie 93 progs on renault megane 2 esl 1 and it not worked.... replaced esl with used one and car was done. Question why julie fail ? j2 till j6 are soldered and 4 wires are connected as in manual and video!

Hi there ... Yesterday i tryed julie 93 progs on renault megane 2 esl 1 and it not worked.... replaced esl with used one and car was done. Question why julie fail ? j2 till j6 are soldered and 4 wires are connected as in manual and video!

Hi, I will forward your question to our tech team. Could you write the details of the car?

I have a problem with julie on Suzuki Vitara with PSA EDC15c2 - 0281 011 359. I connected as per diagram on psa etc but no work

I have a problem with julie on Suzuki Vitara with PSA EDC15c2 - 0281 011 359. I connected as per diagram on psa etc but no work

Hi!
Immo off solution for ECU no. 0 281 011 359 is available in Immo Bypass. (see search results)

As you said, the procedure that you used was designed for PSA group cars.
If you have any technical questions, you can always make a post on our Official Forum: http://forum.carlabimmo.com. If you provide enough infromation about ECU and vehicle, our Expert should be able to assist you.