<![CDATA[MHH AUTO - Renault Group Renault, Dacia, Nissan Discussions.]]>

<![CDATA[MHH AUTO - Renault Group Renault, Dacia, Nissan Discussions.]]> https://mhhauto.com/ Tue, 16 Jun 2026 06:44:38 +0000 MyBB <![CDATA[Nissan X-Trail 2022 Mac Write unsuccess]]> https://mhhauto.com/Thread-Nissan-X-Trail-2022-Mac-Write-unsuccess Sun, 14 Jun 2026 09:21:31 +0000 ste821]]> https://mhhauto.com/Thread-Nissan-X-Trail-2022-Mac-Write-unsuccess i was Replaced AVM module. it as New and Virgin. when i MAC write then Failed.

can tell what issue ?

Thanks]]> i was Replaced AVM module. it as New and Virgin. when i MAC write then Failed.

can tell what issue ?

Thanks]]> <![CDATA[Nissan Qasqhai J10 no vin and no injector code]]> https://mhhauto.com/Thread-Nissan-Qasqhai-J10-no-vin-and-no-injector-code Fri, 12 Jun 2026 22:58:46 +0000 aSTM]]> https://mhhauto.com/Thread-Nissan-Qasqhai-J10-no-vin-and-no-injector-code ). Is it possible that the eeprom file is corrupted? Can the keys be relearned or are they used only once?

actual eeprom 95320.rar

775 bytes

Download

]]> ). Is it possible that the eeprom file is corrupted? Can the keys be relearned or are they used only once?

actual eeprom 95320.rar

775 bytes

Download

]]> <![CDATA[Help needed on installing can clip version, which would work with j2534 xhorse clone.]]> https://mhhauto.com/Thread-Help-needed-on-installing-can-clip-version-which-would-work-with-j2534-xhorse-clone Fri, 12 Jun 2026 19:29:16 +0000 StormShadow1978]]> https://mhhauto.com/Thread-Help-needed-on-installing-can-clip-version-which-would-work-with-j2534-xhorse-clone
Thanks in advance to all who contributes to my humble thread.
-StormShadow]]>
Thanks in advance to all who contributes to my humble thread.
-StormShadow]]> <![CDATA[renault master 3 sid321 2023]]> https://mhhauto.com/Thread-renault-master-3-sid321-2023 Fri, 12 Jun 2026 12:37:35 +0000 alex1971]]> https://mhhauto.com/Thread-renault-master-3-sid321-2023

Renault Master 3, SID321 ECU: when I turn on the ignition, relays start clicking after 10 seconds. There are 3 or 4 relays involved—one is under the glovebox, and the others are in the engine bay.
There are no error codes. When I start the car, it fires up but stalls after 10 seconds, then starts again... If I give it more gas, the engine doesn't have time to stall. It seems like the ground signal to the supply relay drops out for 1 second; then the relay engages, the engine runs for 5 seconds, the relay cuts out for 1 second, and this cycle repeats continuously. I suspect the ECU. I bought another identical flash chip for the SID321. I installed it in the car; the relays click on, and then—silence (no more clicking), but it won't start. Flex won't read the EEPROM.How do I read the EEPROM and change the VIN and IMMO data?
OR how to link a block? I don't think this is the only case. help me figure it out....

This is the original file; can anyone tell me where the immo data is located? (Willing to pay.)

RENAULT_MASTER_SID321.zip

2.05 MB

Download

]]>

Renault Master 3, SID321 ECU: when I turn on the ignition, relays start clicking after 10 seconds. There are 3 or 4 relays involved—one is under the glovebox, and the others are in the engine bay.
There are no error codes. When I start the car, it fires up but stalls after 10 seconds, then starts again... If I give it more gas, the engine doesn't have time to stall. It seems like the ground signal to the supply relay drops out for 1 second; then the relay engages, the engine runs for 5 seconds, the relay cuts out for 1 second, and this cycle repeats continuously. I suspect the ECU. I bought another identical flash chip for the SID321. I installed it in the car; the relays click on, and then—silence (no more clicking), but it won't start. Flex won't read the EEPROM.How do I read the EEPROM and change the VIN and IMMO data?
OR how to link a block? I don't think this is the only case. help me figure it out....

This is the original file; can anyone tell me where the immo data is located? (Willing to pay.)

RENAULT_MASTER_SID321.zip

2.05 MB

Download

]]> <![CDATA[Renault Latitude Dash Mileage Correction]]> https://mhhauto.com/Thread-Renault-Latitude-Dash-Mileage-Correction Thu, 11 Jun 2026 12:45:14 +0000 Gheorghe13]]> https://mhhauto.com/Thread-Renault-Latitude-Dash-Mileage-Correction
Laguna 3 has 200k km.

cluster latitude.jpeg

150.96 KB

Download

latitude357k original.rar

745 bytes

Download

]]>
Laguna 3 has 200k km.

cluster latitude.jpeg

150.96 KB

Download

latitude357k original.rar

745 bytes

Download

]]> <![CDATA[Megane 4 RS (2018) BCM - UDS Remote start]]> https://mhhauto.com/Thread-Megane-4-RS-2018-BCM-UDS-Remote-start Thu, 11 Jun 2026 10:43:55 +0000 foxx155]]> https://mhhauto.com/Thread-Megane-4-RS-2018-BCM-UDS-Remote-start
Trying to enable Remote Engine Start on a 2018 EU Megane IV RS. Hardware conditions are met (hood switch present, EDC in Park, forced ignition ON, voltage OK).
DDT4ALL:
I can successfully write other parameters in the BCM using ExtendedDiagnosticSession. However, when trying to enable the master flag WITH_REMOTE_START_CF, I get a standard UDS rejection:

Request: 2E 01 36 80
Response: 7F 2E 22 (Conditions Not Correct)

It seems the EU firmware has a regional hard-lock for this specific memory address via standard OBD/UDS.

Has anyone successfully bypassed this on CMF1 BCMs? Does it strictly require direct EEPROM editing (Renolink/Bench) to flip this bit?

Thanks.

e8a22f20-09e6-4c87-8fe7-1a0400f771f4.png

169.5 KB

Download

]]>
Trying to enable Remote Engine Start on a 2018 EU Megane IV RS. Hardware conditions are met (hood switch present, EDC in Park, forced ignition ON, voltage OK).
DDT4ALL:
I can successfully write other parameters in the BCM using ExtendedDiagnosticSession. However, when trying to enable the master flag WITH_REMOTE_START_CF, I get a standard UDS rejection:

Request: 2E 01 36 80
Response: 7F 2E 22 (Conditions Not Correct)

It seems the EU firmware has a regional hard-lock for this specific memory address via standard OBD/UDS.

Has anyone successfully bypassed this on CMF1 BCMs? Does it strictly require direct EEPROM editing (Renolink/Bench) to flip this bit?

Thanks.

e8a22f20-09e6-4c87-8fe7-1a0400f771f4.png

169.5 KB

Download

]]> <![CDATA[RNM VCI software issues (need assistance)]]> https://mhhauto.com/Thread-RNM-VCI-software-issues-need-assistance Thu, 11 Jun 2026 08:18:55 +0000 bmw535guy]]> https://mhhauto.com/Thread-RNM-VCI-software-issues-need-assistance Bought a V230 VCI off ali and unit works spot on, was able to get clip to work talking to a clio 4(dont ask me after how many attempts with software)
Im stuck on fixing a valid license issue on the VCI and clip only gives me 5 days on the vci even though clip is registered for three more years.
I tried so many options, system is windows 7 64 bit and all security cut out completely and from what ive read this should be fine.
Thank you in advance.

20260611_161100.jpg

262.16 KB

Download

20260611_161049.jpg

219.08 KB

Download

20260611_161011.jpg

293.87 KB

Download

]]> Bought a V230 VCI off ali and unit works spot on, was able to get clip to work talking to a clio 4(dont ask me after how many attempts with software)
Im stuck on fixing a valid license issue on the VCI and clip only gives me 5 days on the vci even though clip is registered for three more years.
I tried so many options, system is windows 7 64 bit and all security cut out completely and from what ive read this should be fine.
Thank you in advance.

20260611_161100.jpg

262.16 KB

Download

20260611_161049.jpg

219.08 KB

Download

20260611_161011.jpg

293.87 KB

Download

]]> <![CDATA[Renault Clio 2016y. - MediaNav file project to RenoLink]]> https://mhhauto.com/Thread-Renault-Clio-2016y-MediaNav-file-project-to-RenoLink Thu, 11 Jun 2026 06:41:14 +0000 number7]]> https://mhhauto.com/Thread-Renault-Clio-2016y-MediaNav-file-project-to-RenoLink I have tried almoust evryone but without success? Does someone has correct file?
Please...]]> I have tried almoust evryone but without success? Does someone has correct file?
Please...]]> <![CDATA[Dacia ems3141 immo off]]> https://mhhauto.com/Thread-Dacia-ems3141-immo-off Tue, 09 Jun 2026 15:06:48 +0000 gcesare21]]> https://mhhauto.com/Thread-Dacia-ems3141-immo-off ems3141.
Thanks everyone in advance.

renault_continental_ems3141_bench.rar

132.21 KB

Download

]]> ems3141.
Thanks everyone in advance.

renault_continental_ems3141_bench.rar

132.21 KB

Download

]]> <![CDATA[Steering lock problem. Car doesen't start.]]> https://mhhauto.com/Thread-Steering-lock-problem-Car-doesen-t-start Mon, 08 Jun 2026 20:46:52 +0000 Rhyno92]]> https://mhhauto.com/Thread-Steering-lock-problem-Car-doesen-t-start Sorry for my english in advance.
Renault Scenic XMod 1.5 dci.
This car came to my garage with a lot of problem.
The garage before me unscrewed the bolt of steering lock with it in.
I know the "trick" to take and put the 10 amp fuse to wake up the power on dash.
I know how to solve this problem. I open the lock and take off the spring etc etc.
Put again the lock on and the error is the same: B1551 96
I try to take another lock at junkyard. Put it on and I got error DEF (B1551 4A) so i try to verginize it (i put FF on 24c04) and now i got error B1551 55(Virgin lock)
I also try to swap only card on both lock. But I think the problem is in eeprom of original lock can someone help me?
There is a way to recode it after virginize?
There is a way to do an immo off?
I got renolink, i can read and write eeprom and i have canclip too but it doesen't work good because it is an old version.
Please help me, i got this car since 2 months]]> Sorry for my english in advance.
Renault Scenic XMod 1.5 dci.
This car came to my garage with a lot of problem.
The garage before me unscrewed the bolt of steering lock with it in.
I know the "trick" to take and put the 10 amp fuse to wake up the power on dash.
I know how to solve this problem. I open the lock and take off the spring etc etc.
Put again the lock on and the error is the same: B1551 96
I try to take another lock at junkyard. Put it on and I got error DEF (B1551 4A) so i try to verginize it (i put FF on 24c04) and now i got error B1551 55(Virgin lock)
I also try to swap only card on both lock. But I think the problem is in eeprom of original lock can someone help me?
There is a way to recode it after virginize?
There is a way to do an immo off?
I got renolink, i can read and write eeprom and i have canclip too but it doesen't work good because it is an old version.
Please help me, i got this car since 2 months]]> <![CDATA[Nissan/Infinity security gateway (SGW) bypass]]> https://mhhauto.com/Thread-Nissan-Infinity-security-gateway-SGW-bypass Mon, 08 Jun 2026 10:07:10 +0000 msr]]> https://mhhauto.com/Thread-Nissan-Infinity-security-gateway-SGW-bypass Will i be able to perform offline programming on Nissan and Infinity (QX60, QX80) cars with SGW bypass cable?
Diagnostics is Nissan Consult 3 plus v241 with VNCI RNM adapter.

Thanks!]]> Will i be able to perform offline programming on Nissan and Infinity (QX60, QX80) cars with SGW bypass cable?
Diagnostics is Nissan Consult 3 plus v241 with VNCI RNM adapter.

Thanks!]]> <![CDATA[Renault]]> https://mhhauto.com/Thread-Renault--541233 Mon, 08 Jun 2026 09:53:41 +0000 malerikula]]> https://mhhauto.com/Thread-Renault--541233 Hi, I'm looking for someone who can remotely update the Renault 2024 ECU using J2534. Regards]]> Hi, I'm looking for someone who can remotely update the Renault 2024 ECU using J2534. Regards]]> <![CDATA[(SOLVED) Megane 2 dashboard warning lights stay on]]> https://mhhauto.com/Thread-SOLVED-Megane-2-dashboard-warning-lights-stay-on Mon, 08 Jun 2026 08:58:23 +0000 Taine]]> https://mhhauto.com/Thread-SOLVED-Megane-2-dashboard-warning-lights-stay-on Hello, I have a Megane 2, which has a strange problem. If I lock the car or close the door, after some time, sometimes 2 minutes, sometimes a few hours, the rear fog lights symbol, STOP, and red battery warning light up. It will stay like that forever, until I open the driver's door or turn the selector for headlights. If I open all the other doors except the driver's, it stays the same. The battery is drained overnight. When the lights appear, sometimes they flicker, then disappear, then light up again. UCH disconnected when the lights are lit up, no change at all. If I remove the instrument cluster fuse, no lights. When I put it back, if the lights were already on, then they immediately light up again.

I found a post about the dashboard backlight and parking brake light always on. I tried disconnecting the red center connector behind the steering wheel, but it's still the same. Can anyone help? Maybe someone has already solved this problem? Thank you.
[Image: 20260606-172201.jpg]

]]> Hello, I have a Megane 2, which has a strange problem. If I lock the car or close the door, after some time, sometimes 2 minutes, sometimes a few hours, the rear fog lights symbol, STOP, and red battery warning light up. It will stay like that forever, until I open the driver's door or turn the selector for headlights. If I open all the other doors except the driver's, it stays the same. The battery is drained overnight. When the lights appear, sometimes they flicker, then disappear, then light up again. UCH disconnected when the lights are lit up, no change at all. If I remove the instrument cluster fuse, no lights. When I put it back, if the lights were already on, then they immediately light up again.

I found a post about the dashboard backlight and parking brake light always on. I tried disconnecting the red center connector behind the steering wheel, but it's still the same. Can anyone help? Maybe someone has already solved this problem? Thank you.
[Image: 20260606-172201.jpg]

]]> <![CDATA[Patch dash logan 2013-2014]]> https://mhhauto.com/Thread-Patch-dash-logan-2013-2014 Sun, 07 Jun 2026 18:21:04 +0000 Bobodan18]]> https://mhhauto.com/Thread-Patch-dash-logan-2013-2014 I need a patch dash Logan 2013-2014.
If anyone has it and can help me.]]> I need a patch dash Logan 2013-2014.
If anyone has it and can help me.]]> <![CDATA[RENO SAMSUNG QM6 S-LINK UPDATE]]> https://mhhauto.com/Thread-RENO-SAMSUNG-QM6-S-LINK-UPDATE Sun, 07 Jun 2026 05:50:45 +0000 igor.b]]> https://mhhauto.com/Thread-RENO-SAMSUNG-QM6-S-LINK-UPDATE