To obtain your registration code, please send an email to [email protected]
Thread Rating:
  • 14 Vote(s) - 2.86 Average
  • 1
  • 2
  • 3
  • 4
  • 5

2007 MB E220CDI 170PS don't start.

1
I have changed ECU. Cloned ori ecu with used one. Programmed online with Star Diagnose.

ECU DCM 3.2 CRD.11

Checked Driver Authorization and have this, what to do?
Thanks given by:
2
i think you should to do virgin ecu before personalized, did you virgin ecu ?
Thanks given by:
3
Driver Authorization are OK
MB Star2 Star3 Remote coding Anti Theft pin Map pin Renew FBS3 without special tool https://linktr.ee/SebaTechGeorgia 
Thanks given by: sigaik
4
(01-13-2017, 11:27 PM)sigaik Wrote: I have changed ECU. Cloned ori ecu with used one. Programmed online with Star Diagnose.

ECU DCM 3.2 CRD.11

Checked Driver Authorization and have this, what to do?

drive authorization ok
turn key to 50 and give 12v to purple cable on sam front
fuse for starter relay ok?
Thanks given by: sigaik
5
(01-14-2017, 01:11 AM)mb_port Wrote:
(01-13-2017, 11:27 PM)sigaik Wrote: I have changed ECU. Cloned ori ecu with used one. Programmed online with Star Diagnose.

ECU DCM 3.2 CRD.11

Checked Driver Authorization and have this, what to do?

drive authorization ok
turn key to 50 and give 12v to purple cable on sam front
fuse for starter relay ok?

Starter are ok, engine cranck but it will not fire up
Thanks given by:
6
start and see with xentry actual value- high pressure
Thanks given by:
7
(01-14-2017, 04:20 PM)mb_port Wrote: start and see with xentry actual value- high pressure

All data looks okay, low and high pressure.

I have messured injectors and it is no power to injectors, ground is okay.
Thanks given by:
8
donor ecu tested bevore swap?
Thanks given by:
9
No, not tested.

Maybe trying another ecu?
Thanks given by:
Users browsing this thread: