Coding Chevrolet Captiva ABS vin

Hi
Today I changed spare abs from ebay for opel antara my08, and I can confirm that abs unit from 2.4 petrol to 2.0 cdti works  
VIN change with launch dont work, programming failed, also steering angle sensor calibration dont work with launch, it says ok but it was not  
VIN changed with opcom (type without first "W",start with second number, it must be 16 numb.) and steering angle sensor calibration with autocom   
My case solved 

Hi
Today I changed spare abs from ebay for opel antara my08, and I can confirm that abs unit from 2.4 petrol to 2.0 cdti works  
VIN change with launch dont work, programming failed, also steering angle sensor calibration dont work with launch, it says ok but it was not  
VIN changed with opcom (type without first "W",start with second number, it must be 16 numb.) and steering angle sensor calibration with autocom   
My case solved 

Good info bro. I will update my case soon. Im waiting for rework my shit opcom v6 (maybe friday) and try to write bcm with it. Other way is read eeprom and change vin of bcm manually. I will try and inform. Thanks for your info, I think will be a lot usefull for other users!

My case: 2007 Captiva ABS module replacement. Programming with launch did not work. Tis2000 NA , did not also work, got it working only with tech2 under opel antara.

Bcm changed.. now problem with abs. I have c0551-47 vin mismatch in abs. I can clear. But after some time it comes back.

Hello, I tried change VIN ABS with OPCOM (captiva 2007), says successful programmed but still have 16 number, any solution please?