To obtain your registration code, please send an email to [email protected]
Thread Rating:
  • 23 Vote(s) - 2.74 Average
  • 1
  • 2
  • 3
  • 4
  • 5

1999 s600 issue with trunk want open

10
the PSE pump below the seat.
find the vacuum hose to the trunk.

use a vacuum tester

Code:
http://www.benzworld.org/forums/attachments/w123-e-ce-d-cd-td/494601d1360389481-leaking-vacuum-300d-vacuum-tester-hand-held-actron-m.jpg

suck/blow it. the boot will open. IF your mechanical key is not at locked position.
~If I helped, press "thanks" and "reputation". Thanks!~
Thanks given by: cps01
11
Yes i disconnected and reconnected the PSE pump

i believe its in the locked position
i pulled the PSE pump out and reinstalled it again , Pump Motor not turning on
i also tried to Blow/suck on the 4 yellow tube with no luck. dont know if it needs a combination of the black and yellow together or not

still trying

Thanks everyone
Thanks given by:
12
got the key however trunk would not open
drilled the lock and went to a junk yard and picked a used trunk lock, from there went to the locksmith and they keyed my key to the lock

Now i will go and get the PSE pump repaired at Programainc.com
however they told me that the 98 and 99 PSE will need to be reprogrammed

does any one know what is the sequence to reprogram these to the key
If anyone can help with the reprogram or resync i would appreciate it

Thank you
Thanks given by:
13
I've had really bad luck with programa. I've put 3 of them in w220 cars and the all went bad in weeks.
Just a squirrel trying to get a nut.
Thanks given by: cps01
14
They are local , about 45 minute drive from Miami, this is going on a w140 , 99 s600 , They are also offering 2 years warranty on the part

Did you have to resync yours and how did you do that

Thank you
Thanks given by:
15
(12-05-2016, 07:52 AM)cps01 Wrote: They are local , about 45 minute drive from Miami, this is going on a w140 , 99 s600 , They are also offering 2 years warranty on the part

Did you have to resync yours and how did you do that

Thank you

It should have initial startup... did you double check and connect via HHTWIN? It's been a while but I had a w140 just leave my shop yesterday (400SEL) and I remember seeing PSE on HHTWIN.... I may be wrong...
Just a squirrel trying to get a nut.
Thanks given by: cps01
16
I will need to find that software i have carsoft v12 for Mercedes
What the pse pump re builder told me was you need to lock the doors , use the key to manually lock the driver side and within 20 second put the key in the ignition position 2 or something like that , he did not remember
Will see if i can find any details on this
Thanks given by:
Users browsing this thread: