To obtain your registration code, please send an email to [email protected]
Thread Rating:
  • 17 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Installing Xentry/DAS from ground up

10
is your Chinese c4 a sdconnect with menu display on it?
if not, then your 'c4' is a c3.
Thanks given by: Freebird
11
(11-20-2016, 06:34 PM)pesona Wrote: is your Chinese c4 a sdconnect with menu display on it?
if not, then your 'c4' is a c3.

Yes. My C4 is a SDConnect with a menu display on it. I've managed to get it to communicate with the computer, and it passes the self-diagnosis test without errors. When trying to run diagnosis however it fails.
Thanks given by: pesona
12
I said it before it has nothing to do with your multiplexer. I think if you google mhh user "Pesona cal 830" you'll find what you need.
Thanks given by: Rocinante , pesona
13
@Mackhack I agree with you. i only make sure that his mux is a partD (C3) or not. Because that patch is for C3.
Cal 830 error is initialization of mux failed. it should not happen with his SDConnect if his xentry/DAS bin folder is 'original'.


@Freebird

i assume you stumble with DAS. try this DAS 09-2016 original bin. Rename your das\bin to das\bin_old and copy this bin folder.

.txt

DAS bin 09-2016 ori.txt

45
70 bytes


hope this solve your problem.

p.s:
1. yes, don't forget to apply xentry blacklist in folder xentry/llist
2. it is better for you to update your sdconnect firmware. installed 6 Ni-MH Rechargeable batteries,Size:AA, 12v, cap: above 1700mA. if you don't intend to, you have to rename 3 update folders in sdconnect toolkit folder.
Thanks given by: Rocinante , meansure
14
Original with blacklist fix. Nothing else is required. I just wanted to add that.
Thanks given by:
Users browsing this thread: