abs light on help c220 w203

Hi all,I need some help with a 2004 w203 2.1 cdi rhd with a abs light on,with fault code c1210 terminal 30. ive checked fuses under the bonnet drivers side all ok,could anybody help with fault tracing or wiring diagram for this terminal 30? much appreciated thanks

Check fuses once again..... In most cases these are not fuses but burned contats holding fufes. You need to clean or replace these.

Check fuses once again..... In most cases these are not fuses but burned contats holding fufes. You need to clean or replace these.

hi do you know the fuse numbers i need to check? thanks

It is fuse 59 and 60 in the front SAM. Wiring diagrams are attached

If it is ATE unit then check brushes on pump motor.
Motor brushes is worn and then you get same fault code like no feed!

It is fuse 59 and 60 in the front SAM. Wiring diagrams are attached

cheers found broken wire from fuse 60 to abs uint pin 1,so i run new wire tested all ok thanks for diagram fridrichkl