To obtain your registration code, please send an email to [email protected]
Thread Rating:
  • 27 Vote(s) - 2.74 Average
  • 1
  • 2
  • 3
  • 4
  • 5

SOLVED - Flash Door Control Module - non-working window

1
Hi all,

I finally have my C3 MUX working using an installation guide for Xentry 9/2014+SDMedia. I did the installation as per the guide and did nothing else. The C3 MUX is working and reading fine.

On the weekend, my driver's power window on my 2007, S550 (W221) stopped working. The "Actual Values" of the module shows that the switch is working properly.

I did a search and it appears that many people are able to solve their issue by flashing the door module:

Code:
http://mbworld.org/forums/s-class-w221/377008-driver-window.html

The above thread references the following bulletin:

Code:
http://workshop-manuals.com/mercedesbenz/cl_63_amg_%28216.377%29/v8-6.3l_%28156.984%29/windows_and_glass/windows/power_window_control_module/component_information/technical_service_bulletins/customer_interest_for_power_window_control_module/p-67_39-22b/sep/08/body_power_window%28s%29_are_inoperative/

My question is the following: Can anybody direct me to a link which will allow me to complete the following operation using my existing hardware / software:

To resolve, flash the applicable door control module using SDS version 08/08 or later, via SDS menu path: Control units --> Seats and doors -->
DCM-XX - Door control module (Choose DCM with the issue) --> Control unit adaptations --> Control module programming. Do not replace any
parts.


Many thanks in advance!
Thanks given by: Rayman123

Messages In This Thread
SOLVED - Flash Door Control Module - non-working window - by edwin.dario - 12-08-2016, 07:09 AM
Users browsing this thread: