vw touran 2009 steering angle sensor error

cant calibrate G85 Steering Angle sensor.
Customer told us that someone changed steering rack. Fault in Central Electric: 01309 comes only when i drive with car. Can it be that installed steering rack is wrong or damaged? G85 is new and steering column control module is also changed.

here is photos faults and basic settings. 
onedrive link.
https://1drv.ms/f/s!AiW6b4K09xm1g_hO6QF2lwHfUtQAEw

Hi!
Everything is in the bag now in your case.
I saw when new parts arrived and they was faulty.
So, for first I think you should dig into the deep and come out with some testing results.
- dtc's
- wiring conditions
- plugs, conector conditions etc...

Then we can help you forder.

Good luck my friend and I'm waiting for your progress.
My best regards.

Sent from my SM-J500F using Tapatalk

If SAS can't be adapted. I would suspect faulty installation of steering rack (Possibly one revolution out on shaft) Check how many turns from centre to full left lock & centre to full right lock. Also may just need an alignment

Cheers

yes Sparky001, can be. We just adjust week ago one Mercedes steering rack. Same case. I check it tommorow. This is when you work late. Cant think clear.

If you change from second to third generation steering, you need to do a some adaptation with vcds


44 steering
Adaptation
Channel 3: 0 DSR Esp Front MK60
channel 9: 2 G85 MK60


Later you do a basic setting (g85) in ABS.

i checked turns center to lock. Left 1,5 turns and right 1,5 turns. Seems to be ok.

guti_87
about adaptation. Channel 9 should be 1 i think. Because 2 is only for MK70.
picture
https://1drv.ms/u/s!AiW6b4K09xm1g_hQ7-Xq...w?e=B6CcHP

Which reference do you have in Steering Wheel?

Reference  1k0 959 549 CD, don't need a external G85 in the Steering wheel, only use a internal G85 from Steering assist. 
So should be changed to 0 in Channel 9.

i have tried Channel 9 with 0 and with 1. No difference.
here is video.
https://1drv.ms/v/s!AiW6b4K09xm1g_howYgf...w?e=qiNzsw

Try to change again to 0 in channel 9. The first Step is calibrate the internal g85 in 44 Steering and when it is ready.

Finally calibrate G85 in abs. Good luck.